Pipe crimping machine A Kevin Tuo pipe crimping machine A Pipe crimping machine manufacturer

Pipe crimping machine A. Kevin extension pipe crimping machine A. Pipe crimping machine manufacturer Crimping machine (now also known as pipe locking machine, pipe crimping machine, pipe buckling machine, buckling machine, riveting machine and shrinking machine, etc.) in Cantonese in Guangdong Province likes to call it: beer throat machine. The English name is usually translated as: crimping machine or crimper and swager. It is suitable for the clamping of various types of mechanical high and low pressure oil pipes, air pipes, water pipes, cable joints, automobile air conditioning pipes, automobile power steering pipes, engine oil pipes, gasoline supply pipes, as well as construction accessories, and daily hot water pipes. It is widely used in vehicles, engineering machinery, hydraulic machinery, welding and cutting equipment and other industries. (Purpose) The crimping machine is a hydraulic equipment used to crimp pipe fitting assemblies. It applies shrinkage force to the supporting metal joints through the mold of the crimping machine, and firmly crimps the metal joints on the supporting high-pressure oil pipes for engineering machinery or brake pipes, oil pipes, air conditioning pipes, and power pipes on automobiles. The crimping machine is suitable for crimping various types of mechanical high and low pressure oil pipes, air pipes, water pipes, cable joints, automobile air conditioning pipes, automobile power steering pipes, engine oil pipes, gasoline supply pipes, as well as construction accessories, and daily hot water pipes. It is widely used in vehicles, engineering machinery, hydraulic machinery, welding and cutting equipment and other industries. For example, according to the use function, it can be divided into hydraulic high-pressure pipe withholding machine, brake pipe withholding machine, air-conditioning pipe withholding machine, power pipe withholding machine, etc. According to the mechanical structure, it can be divided into straight-cylinder withholding machine, double-column type withholding machine, open-type withholding machine, C-type withholding machine. According to the control method, it can be divided into electromechanical withholding machine, PLC-type withholding machine, and CNC-type withholding machine. 1. Operators must operate according to process regulations. 2. After the machine stops being used, the power supply must be cut off. 3. When replacing the mold, it must be done after the machine is shut down. 4. The joint surface of the mold base and the mold should be kept clean and free of metal shavings and other hard objects. 5. Inject lubricating oil on the slope of the mold base before starting the machine. 6. The positioning screws must be tightened before installing the module. 7. The pressure regulating valve must be adjusted to the specified pressure. 8. It is strictly forbidden to put your hands inside when working. 9. Electrical safety regulations must be followed when repairing electrical parts. Reminder: Don’t rush to remit money or pay a deposit before seeing the real thing to avoid being cheated.